First operating session for 2020

The crew came together today for the first operating session on the GC&SF for almost a year. The yards were operated by the graduates from the recent training session, while the two Johns (who've operated the yards in the past) got to run other trains.

Here are some photos taken before and during the session:

An end-on view of the peninsula that holds Wynnewood (left) and Davis (right).

End-on view of the peninsula that holds Dougherty (left) and Big Canyon (right).

(L-R) Peter, Derek and Chris at Ardmore yard.

Bill, John C (background) and Graham at Pauls Valley.

John C, with the morning Pauls Valley - Davis local, at Wynnewood.

Peter running the Ardmore - Dougherty local through Big Canyon.

John F. running a southbound Fast Freight through the house track at Davis. (???)

Bill returning to Pauls Valley yard with a cut of cars, after switching the town's industries.

John C. making some set-outs and pick-ups at Davis.

John F. (L) and John C. (R) preparing to switch some industries at Wynnewood.

Chris.

John F. with the afternoon Pauls Valley - Davis local freight, at Wynnewood.

Derek running the yard at Pauls Valley.

Graham switching the Dolese Bros. quarry at Big Canyon.

John F., still hard at work at Wynnewood.

(L-R) John C, Chris (Ardmore yard operator) and Peter, at Ardmore.

The local switcher, working industries at Wynnewood.

John F. has kindly donated several buildings that were used on his fallen flag "Boise Sub" layout that are not needed for his new layout. They are a very nice addition to the street scene I am creating for Pauls Valley. Thank-you very much, John.

The four completed structures were donated by John F.

The streetscape behind the Pauls Valley depot is coming together very nicely.

I want to thank all the guys for coming over today to make this a very enjoyable session, with a special thanks to Graham, Derek and Chris for operating the yards.

And thanks once again to John F. for the buildings.

Regards to all,
Ron

Train - ing operators (🤦‍♂️)

I had a few guys over last Tuesday so I could give them some tuition and practice in running the yards on my layout.  They took turns running through-freights around the layout, and switching cars in and out at Pauls Valley and Ardmore, just as they would during a normal operating session.

John has actually run a yard several times before, but the only training he had received was "on the fly", during sessions. For him, this was an opportunity for me to fill in a lot of gaps.

I am pleased to report that the guys all did very well.

Here are a few photos that I took to remember the day by.

John and Derek at Pauls Valley

Graham and Chris at Ardmore

Chris and Graham at Pauls Valley

John, Derek and Graham

I'm very grateful to John, Chris, Derek and Graham for volunteering to learn this role as it is critical to the success of my operating sessions.  Now I've just got to sort out the mess we left the yards in, and then I can organise a session where the guys can do the job for real.

Regards,
Ron

Downtown Pauls Valley

I've been experimenting with different ways to site structures to represent the Pauls Valley downtown area behind the depot. My first thought was to place a row of DPM and Merchant's Row retail structures along the street, backing on to the wall. But the real buildings along Santa Fe Street are more industrial in nature than retail.

This is how the mock-up looks at present, but I still need to do some scratch-building and kit-bashing:

Regards,
Ron

Pauls Valley is getting a make-over

Over the past few months I've been working on structures for Pauls Valley, and working out how to position them. Once I got that sorted I decided to paint the track so that I can get started on the scenery.

In the past I've used a paint brush to paint the sides of the rails, but as Pauls Valley has such a lot of track I decided to use my airbrush instead. I had no prior experience with airbrushing track, and wasn't sure whether over-spray might get onto the walls and other places where I didn't want it. But I had a lot of newspaper on hand, and I took the approach that "an ounce of prevention is better than a pound of cure." It turned out that I was over cautious.

Here's how Pauls Valley looked after I had finished spraying the track:

Next step was to invite Rod over to paint the backdrop for me. Painting backdrops is one of Rod's Superpowers. Here he is with paintbrush in hand.

This is how Pauls Valley looks with my buildings back in place:

Here's a closer photo of Jacobson Concrete (left) and the incomplete elevator complex (right) showing how the backdrop looks behind. I will be "planting" trees and shrubs between the buildings and the painted backdrop.

A big thank-you to Rod for his help with this.

Regards,
Ron

This day in history ...

I was looking at some old photos and realised that today is a noteworthy anniversary in the history of my GC&SF Railway.  Fifteen years ago today I laid a temporary main track around the layout peninsula that now contains my townships of Dougherty and Big Canyon, and the first trains around that peninsula met at a point just south of the present day location of Dougherty.

Here is a photo of that happy event, together with a photo of my very good friends Vic, John and Rod who came over about a month or so earlier to help me install the pre-assembled skyboard for the peninsula. Actually, Vic, John and Rod did all the installation. I just stood back with my fingers crossed hoping that I had built the skyboard correctly.

First trains around the Dougherty - Big Canyon peninsula.

(L-R) Vic, John and Rod installing the skyboard between Dougherty and Big Canyon.

I really should get stuck into building the scenery on this peninsula, but recently I've been focussing on Pauls Valley.

EDIT ...

For clarity, I have actually started the scenery on this peninsula. I just have a lot more to do.

Regards,
Ron

Got my mojo working ....

I has been a long time since my last post. I kinda lost my model railroad mojo after that last session, when things didn't go as well as I'd hoped. I had (and still have) a few problems that I need to resolve since that session, but I didn't have the motivation to fix them.

But I haven't been completely idle since then. I've been working on several structures for the layout, and most recently working out where to place them once they're finished.

Thanks to some amazing research by my friends Geoff Hoad (in Sydney) and Mark Parry (in the UK), I now have a very good idea of what industries were served by the GC&SF in Pauls Valley back in 1962. That's just two years later than I am modelling, or close enough! Most of that information came too late for me to design my track plan for Pauls Valley around it, and I don't have the space to do that anyway. But I will try to include as much as I can.

One surprising (to me) discovery from Geoff's work was the number of oil distributors that had small receiving warehouses along the rail siding to take delivery of bulk and packaged (drummed) oil products. The following cropped image from an aerial photo taken in 1962 shows those structures that still existed in 1962. The industry names are from a 1942 Sanborn map, and may not be accurate for 1962. For example, by 1962 the Field Bros and Cities Service facilities were owned by Gulf Oil.  However, I'm going to stick with Field Bros. Co for my model as I like it better than Gulf Oil.






















That  larger photo from 1962 also revealed what Jacobson Concrete looked like back then, showing the location of the ready-mix concrete plant, and the then single silo for drilling mud (the structure casting the long shadow at the bottom of the image.)

One of the most interesting things revealed by the 1962 aerial photo is the number of freight cars that were received by these industries. There are three 40-ft box cars at the Texaco building, and six at Jacobson. The evidence suggests that in 1960 Pauls Valley was a busy place as far as railroad activity was concerned.

As I mentioned, I don't have space to model Pauls Valley accurately, but I will try to represent the industries that operated in 1960. I've laid a little more track, and been experimenting with my partially completed models to see how they will fit the scene. The following photos show my current thinking.

This photo shows Field Bros. Oil along the left and Gordon White Lumber on the right. The siding that Gordon White is located along is new.

This photo shows Jacobson Concrete on the left (the ready-mix plant will go on the far side of the buildings), and small grain elevator on the right.

The "downside" of reworking Pauls Valley is that I will be increasing the amount of work to be performed there during an operating session. I already have a strategy to tackle that, but that will be the subject for another post.

Thanks for reading.

Ron

March 2019 Operating Session

In my previous post I mentioned that I have 'discontinued' one of my passenger trains (Trains 5 and 6), and rearranged the consists of the other passenger trains to more accurately model the trains that they are based on. Rather than leave a hole in the timetable, I added an extra through freight - well, two actually, one in each direction. My initial plan was to simply have these through freights run on the discontinued passenger trains' schedules which would have required very little change to the timetable and the associated train instructions. And so, I sent out the invitations to an operating session to be held on 26th March, and set to work rewriting the necessary instructions.

Then, just three days before the session, I had a flash of brilliance stupidity. Instead of scheduling these two new freight trains to run non-stop from staging to staging, why not have them stop at the yards to pick up and set out cars that are moving between the yards. In the past those cars were moved by the Fast Freights (Trains 37, 38, 39 and 40), but they were often forgotten about. So I spent the last few days before the session hurriedly adjusting the timetable and rewriting train instructions.

Before the session started I warned the guys that there were probably errors in the instructions, and to watch out for possible problems. I figured that I would just trouble-shoot them as they arise, like I always do.

What I didn't take into account was that I had only one experienced yard operator (John C) for the session, and it therefore fell to me to run the other yard.

And so the stage was set for a disaster. Operating a yard is a full time job in its own right, and the questions and problems arising from my timetable changes required a lot more of my time than usual. And if I wasn't already as busy as ten men, I had two turnouts fail!! (That just does not happen on the GC&SF.)

The feedback I received from the operators was that they had a good time, but I personally found the session to be very stressful.

I was so busy that I didn't even think to take photos, but fortunately Chris and Derek both brought their cameras, and they have graciously allowed me to post their photos here. (Thanks guys.)

The Pauls Valley local freight is preparing to depart Pauls Valley.

The Pauls Valley local freight is switching at Wynnewood while a north-bound Fast Freight
rumbles past on the main track.

(L-R) Derek operating the Pauls Valley local freight, Bill, Peter running a through-freight,
and yard operator John C.

(L-R) Rod, Chris, Graham and me (operating the Ardmore yard.)

Bill is checking the turnout alignment as he brings the gravel train into Dougherty.

(L-R) Rod, Peter K and me.

John C is doing some car switching at Pauls Valley. Peter S is watching the CCTV monitor as he
moves a train into the north staging yard.

The Pauls Valley local freight has completed its switching at Wynnewood and is awaiting approval
to run to Pauls Valley yard.

John C hard at work at Pauls Valley yard. In the background Peter K is checking the car cards for
a train he is about to run from staging.

Ooops ... Graham had some sort of problem with the cars at Gene Autry.

... and ... another problem with the cars at Big Canyon. Looks like no grain spilled from those grain cars.

(L-R) Rod, Peter K and Chris (with John C in the background.)

Graham has brought a southbound Fast Freight into Ardmore, and he and I are
sorting through the paperwork.

John C is working the yard at Pauls Valley.

A SAL boxcar sitting on the track at Musgrove Lumber. I think that Chris took this photo,
and for some reason I kinda like it.

John C and Chris are working a train at Pauls Valley while Peter K prepares for his
next train from north staging.

I am doing some switching at Ardmore, while Graham lines the turnouts for a train
he is about to run through town.

This photo is a bit out of sequence, but it shows Chris cutiing the locos off the local freight after
bringing the train into Pauls Valley.

My thanks go to Chris and Derek for allowing me to use their photos. Chris is a regular GC&SF operator, and I've posted his photos before. I like that he takes pictures that I never think to take (such as the photo of the tree, with the box car sitting at Musgrove Lumber in the background.)

Derek is a new crew-member, and he brought with him a camera that does image-stacking in the camera. Yowzers! It produces some impressive photos, but you do have to be careful when you're taking candid photos. Here are two photos that Derek took looking along Pauls Valley yard. The distance from the stock car in the left foreground to the elevator barely visible in the background is about 14' (4 metres). In the second photo you can see that Chris moved his hand a little while the camera was taking the six images that it would use for the stacked photo.

Thanks also to all the guys for coming over to run trains, and for tolerating my crankiness when things started to get tough (for me).  I'm not sure when my next session will be as I have a bit of work to do repairing/replacing one of the failed turnouts, and correcting the problems with the instructions.

Regards to all,
Ron